 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only SURFACE MOUNT LED TAPE AND REEL LUY9553H/TR1 DATA SHEET DOC. NO REV. DATE : : : QW0905-LUY9553H/TR1 A 09 - Jun - 2005 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Page 1/7 Package Dimensions 3.5 3.2 1.85 2.8 2.2 1.85 0.95 0.9 + 0.9 - Note : 1.All dimension are in millimeter tolerance is O 0.2mm unless otherwise noted. 2.Specifications are subject to change without notice. Carrier Type Dimensions 4.0 2.0 1.55 0.23 1.75 5.5 12.00.3 9.3 Polarity 4.06 4.0 3.12 2.24 Note : The tolerances unless mentioned is O 0.2mm,Angle O 0.5. Unit=mm. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Page 2/7 Reel Dimensions 16.0O 1.0 r 178O 2.0 14.2O 1.0 74.0O 1.5 Part No. LUY9553H/TR1 Description 12.0mm tape,7"reel Quantity/Reel 1500 devices LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Page 3/7 Absolute Maximum Ratings at Ta=25 J Absolute Maximum Ratings Parameter Symbol UY(H) Forward Current Peak Forward Current Duty 1/10@10KHz Power Dissipation Reverse Current @5V Electrostatic Discharge Operating Temperature Storage Temperature Soldering Temperature IF IFP PD Ir ESD Topr Tstg Tsol 50 100 130 10 2000 -40 ~ +85 -40 ~ +100 Max 260J for 5 sec Max mA mA mW UNIT g A V J J Typical Electrical & Optical Characteristics (Ta=25 J ) PART NO MATERIAL COLOR Emitted Lens Water Clear Dominant wave length f Dnm Spectral halfwidth f nm Forward voltage @20mA(V) Luminous intensity @20mA(mcd) Viewing angle 2c 1/2 (deg) Min. Max. Min. 590 20 1.7 2.6 220 Typ. 450 120 LUY9553H/TR1 AlGaInP/GaP Yellow Note : 1.The forward voltage data did not including O 0.1V testing tolerance. 2. The luminous intensity data did not including O 15% testing tolerance. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Page4/7 Typical Electro-Optical Characteristics Curve UY(H) CHIP Fig.1 Forward Current vs. Forward Voltage 1000 Fig.2 Relative Intensity vs. Forward Current 3.0 Forward Current(mA) 100 10 1.0 Relative Intensity Normalize @20mA 2.0 3.0 4.0 5.0 2.5 2.0 1.5 1.0 0.5 0.0 1.0 10 100 1000 0.1 1.0 Forward Voltage(V) Fig.3 Forward Voltage vs. Temperature 1.2 Forward Current(mA) Fig.4 Relative Intensity vs. Temperature 3.0 Relative Intensity@20mA Normalize @25J Forward Voltage@20mA Normalize @25J 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 Ambient Temperature(J ) Ambient Temperature(J ) Fig.5 Relative Intensity vs. Wavelength 0X -30X 30X Relative Intensity@20mA 1.0 0.5 -60X 60X 0.0 500 550 600 650 100% 75% 50% 25% 0 25% 50% 75% 100% Wavelength (nm) LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Soldering Iron: Basic spec is O 5 sec when 260J. If temperature is higher, time should be shorter(+10 J / -1sec). Power dissipation of iron should be smaller than 15W,and temperature should be controllable. Surface temperature of the device should be under 230 J . Page 5/7 Soldering heat Soldering heat Max. 260J 245O 5J within 5 sec Preheat 120 ~ 150J 120 ~ 180 sec Reflow Temp/Time Temp. (J ) 220 Rising +5J /sec Cooling -5J /sec 150 120 Preheat 60 ~ 120 sec 5sec Time LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Precautions For Use: Storage time: 1.The operation of Temperatures and RH are : 5 J ~35J ,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 J ~ 35J ,RH60%, they should be treated at 60JO 5 J fo r 15hrs. Page 6/7 Drive Method: LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd current should not be allowed to change by more than 40 % of its desired value. Circuit model A LED Circuit model B LED (A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED. Cleaning: Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED. ESD(Electrostatic Discharge): Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY9553H/TR1 Reliability Test: Page 7/7 Classification Test Item Test Condition 1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) Reference Standard MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1 Operating Life Test High Temperature Storage Test Endurance Test Low Temperature Storage Test 1.Ta=105 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) MIL-STD-883D:1008 JIS C 7021: B-10 1.Ta=-40 JO 5J 2.t=1000 hrs (-24hrs, +72hrs) JIS C 7021: B-12 High Temperature High Humidity Storage Test 1.Ta=65JO 5J 2.RH=90 %~95 % 3.t=1000hrs O 2hrs MIL-STD-202F:103B JIS C 7021: B-11 Thermal Shock Test 1.Ta=105 J O 5J &-40JO 5J (10min) (10min) 2.total 10 cycles MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4 Solderability Test 1.T.Sol=235 JO 5J 2.Immersion time 2 O 0.5sec 3.Coverage U 95% of the dipped surface Temperature Cycling Environmental Test 1.105J ~ 25 J ~ - 55J ~ 25J 30mins 5mins 30mins 5mins 2.10 Cyeles IR Reflow Ramp-up rate(183 J to Peak) +3 J second max Temp. maintain at 125( O 25)J 120 seconds max Temp. maintain above 183 J 60-150 seconds Peak temperature range 235 J +5/-0J Time within 5 J of actual Peak Temperature(tp) 10-30 seconds Ramp-down rate +6 J /second max MIL-STD-750D:2031.2 J-STD-020 |
Price & Availability of LUY9553H-TR1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |